- Hydrogenation Behavior of Sponge Titanium
-
Ji-Hwan Park, Dong-Won Lee, Jong-Ryoul Kim
-
J Korean Powder Metall Inst. 2010;17(5):385-389.
-
DOI: https://doi.org/10.4150/KPMI.2010.17.5.385
-
-
29
View
-
0
Download
-
6
Citations
-
 Abstract
 PDF
- Titanium powders have been usually produced by de-hydrogenating treatment in vacuum with titanium hydride (TiH_2) powders prepared by milling of hydrogenated sponge titanium, TiH_x. The higher stoichiometry of x in TiH_x, whose maximum value is 2, is achieved, crushing behavior is easier. TiH_x powder can be, therefore, easy to manufactured leading to obtain higher recovery factor of it. In addition, contamination of the powder can also minimized by the decrease of milling time. In this study, the hydrogenation behavior of sponge titanium was studied to find the maximum stoichiometry. The maximum stoichiometry in hydride formation of sponge titanium could be obtained at 750°C for 2 hrs leading to the formation of TiH_sim1.99 and the treating temperatures lower or higher than 750°C caused the poor stoichiometries by the low hydrogen diffusivity and un-stability of TiH_x, respectively. Such experimental behavior was compared with thermodynamically calculated one. The hydrogenated TiH_1.99 sponge was fully ball-milled under -325 Mesh and the purity of pure titanium powders obtained by de-hydrogenation was about 99.6%.
-
Citations
Citations to this article as recorded by  - Study on Manufacture of High Purity TiCl4 and Synthesis of High Purity Ti Powders
Jieun Lee, Jin-Ho Yoon, Chan Gi Lee
Journal of Korean Powder Metallurgy Institute.2019; 26(4): 282. CrossRef - Effect of Heat Treatment Temperature and Atmosphere on the Microstructure of TiH2-WO3 Powder Mixtures
Han-Eol Lee, Yeon Su Kim, Sung-Tag Oh
Journal of Korean Powder Metallurgy Institute.2017; 24(1): 41. CrossRef - Titanizing on the surface of iron metal foam
Su-In Lee, Jung-Yeul Yun, Tae-Soo Lim, Byoung-Kee Kim, Young-Min Kong, Jei-Pil Wang, Dong-Won Lee
Thermochimica Acta.2014; 581: 87. CrossRef - Study on synthesis of Zr–Ti alloy powder using molten magnesium
D.-W. Lee, Y.-K. Baek, W.-J. Lee, J.-P. Wang
Materials Research Innovations.2013; 17(sup2): s113. CrossRef - Direct synthesis of zirconium powder by magnesium reduction
Dong-Won Lee, Jung-Yeul Yun, Sung-Won Yoon, Jei-Pil Wang
Metals and Materials International.2013; 19(3): 527. CrossRef - Synthesis of Zr-Ti Alloy Powder by Magnesium Reduction
Dong-Won Lee, Geun-Tae Park, Tae-Soo Lim, Hye-Moon Lee, Ji-Hun Yu
Journal of Korean Powder Metallurgy Institute.2011; 18(4): 359. CrossRef
|
kpmi
